Plumbing leaks are one of the things homeowners dread most. If you?re lucky, you can tell that there?s a leak and that it needs to be taken care of. If you?re not, leaks can go undetected and cause major damage to the structure of your home. That?s where our leak detection services come in.

Our plumbers are leak detection experts. It?s a skill we?ve developed over the almost 40 years we?ve been in business. We have the expertise and the tools necessary to find all types of leaks in residential and commercial plumbing systems. We specialize in finding two types of leaks: pin hole leaks and slab leaks.

Pin hole leaks happen when a small hole appears in a water pipe. These leaks may be caused by the age of the pipe, the water pressure, the type of minerals in your water,aseasonal temperature fluctuations, or the way the plumbing was installed.

Slab leaks canabe trickier to find and correct. A higher water bill is many homeowners? first clue that they have a slab leak. You can also do a simple test by turning off all the water valves on your property. Look at the reading on your water meter and note the time you shut off the valves. If the meter continues to move despite no water being used, you may have a leak. It?s important to detect and repair slab leaks as soon as possible because they can lead to foundation damage, wood framing damage, or the growth of mold or mildew.

If you suspect you have a leak, don?t try to find and fix it yourself. Many people have tried to make these repairs themselves, only to cause more damage to their property. A licensed, insured, bonded plumbing company like ours will be able to accurately locate the leak and fix things right the first time. You?ll have peace of mind and your structure will be protected.

Call Delk Plumbing for more information about our leak detection services, as well as all of our other plumbing services. We serve the entire Summerville, SC area, including West Ashley, Charleston, and Daniel Island. Free estimates are available for both residential and commercial plumbing jobs.

Updated: Mar 24, 2017

Despite the severe drought, the California area could be facing heavy storms as the rainy season approaches. With a strong El Nino weather system forecasted for this year, it?s time to begin preparing for the rainy season in California.

When is the Rainy Season in California?

The rainy season generally begins in October and lasts until February. The heaviest storms, however, generally don?t begin until December, and the Bay Area has experienced years when heavy storms hit in March and April.

What are the risks associated with the rainy season?

Although a rainy season might seem like a welcome addition after an extremely dry year, the rainy season could bring a lot of problems with it. The main risk: flooding.

Flooding can be especially common during the rainy season, and this year is no exception. This can happen even in the Bay Area. Flash flooding can be incredibly damaging to residential and commercial properties if not handled correctly. It can also be very dangerous; flooding has been the cause of numerous deaths, leading to the National Weather Service?s Turn Around Don?t Drown campaign.

Mudslides are another potential risk, especially for properties and locations near hillsides. Heavy rain on these locations can cause mud to quickly accelerate downhill, potentially damaging nearby properties.a

How to Prepare Your Home for the California Rainy Season

There are several actions you can take to get prepared for the upcoming rainy season. We?ve put together a quick list of tips to help get you started:

When your plumber creates a new plumbing system for your home, he will need to place drain line vents for each pipe and plumbing appliance. Drain line ventilation is essential for making sure that water is able to flow smoothly into the main sewer line, without gurgling or getting trapped. Your plumbers in Jacksonville will have the knowledge and tools that are needed to properly place your drain line vents and make sure that your entire plumbing system is operating smoothly. To help you prepare for an upcoming visit from your plumber, here is a look at the basics of what you need to know about drain line ventilation.

Drain Line Vents Ensure Smooth Drain Flow

The primary role of your drain line vents is to make sure that water flows smoothly through all of your drains. Without vents in the drain lines, flowing water would naturally create suction. This suction causes water to gurgle and become clogged. With properly installed and maintained drain line vents, you will be able to ensure that your plumbing system is not plagued by gurgling pipes.

Drain Line Vents Should Be Installed Throughout the Home

A properly installed plumbing system will contain many different drain line vents. In fact, each of your major plumbing fixtures and pipes needs to be equipped with a drain line vent unit. These drain line vents send trapped air to the outside, and they also help to eliminate wastewater odors. Your plumber will know precisely where each vent should be installed for maximum performance.

Drain Line Vents Can Become Clogged

When your plumbing system is having trouble clearing water through the pipes, the problem could lie in your drain line vents. Occasionally, the vents themselves can get clogged with debris. If the vent is fully blocked off, your drains and pipes may start to gurgle, whenever you turn on the tap. Since gurgling drains can indicate several other plumbing issues, you will want to have your plumber come to your home to check out the condition of your drains and vents.

If you?re like the average American consumer, you spend approximately $1,000 a year on bottled water! Did you know that recent studies indicate that 25% of this bottled water comes from tap water resources and not the pristine water sources indicated by the flashly photos on the bottle? The truth is, the plastic bottle waste in this country alone is staggering. According to recent studies, only about 12 percent of plastic bottles are recycled. That?s over 40 million bottles a day that go into the trash. That?s a lot of non-recycled plastic! Perhaps you drink bottled water because you aren?t satisfied with the tap water choices you have. That?s no problem. We have an alternative.

If you would like a greener alternative to your natural tap water options, why not consider a whole house water purification system like H2O Harmony?? Easy and affordable, Abacus Plumbing can install a point-of-use water purification system under your cabinet so that it is out-of-sight. All you need to do is enjoy clean, clear water, and the peace of mind that comes with it.

Schedule an appointment online and start benefittingafrom a whole house water purification system.

Many homes in the Bergen County, NJ area rely on boilers and similar hydronic systems to heat their homes. They?re a very practical and easy to use system, relying on heated water to convey warm temperatures throughout your home. But like any system, they need repairs from time to time, and when they do, you need a professional plumbing services to handle it. The causes of such repair calls are myriad, but we?ve listed three of the most common repairs for boilers below. The more you can familiarize yourself with them, the better you can respond when they appear.

1.aaaa Leaks

Leaks are likely the most common problem in a boiler system, and the good news is that they can usually be repaired quite easily. They stem from corrosion within the pipes, or sometimes from poorly fitted components or similar connections. Spotting the leaks can be more troublesome, since the steam powering boilers can often cause the water to evaporate. Check the pressure gauge on your system to determine if any leaks are present, in addition to looking for water puddles or damp spots.

2.aaaa Failing Ignition Systems

The ignition system lights the burners that heat up the tankaand allow the boiler to do its job. When they break down, the boiler simply won?t work. Modern systems use electrical ignition, but older systems still use pilot lights, and both can be subjected to mechanical failure in the right circumstances.

3.aaaa Overheating

Going hand in hand with leaking is the problem of overheating, which often happens when your boiler hasn?t been serviced in a while and sediment has built up in the tank. It lowers the amount of water the boiler can hold, which leads to overheating, higher pressure, and leaks. You can prevent this problem by scheduling regular maintenance sessions to clear out the sediment.

Call BZ Dependable today for boiler repair issues!