Quote: Originally Posted by jason608 I have a 6 month old Perfect Grind garbage disposal. When I turn on the wall switch it does not start, but if I push the blades it will start, slow down, start, slow down then stop again. Or, it will start right up, grind for a few seconds then stop. Here are two pictures and a video of the issue. There is no hex screw on the bottom instead the instructions state to manualy move the blades from the top back and forth to remove any jammed objects, which I have done several times. https://www.dropbox.com/sh/1j7rao3lt...MtYuAbsua?dl=0 I would change that out before you lose a finger

Quote: Originally Posted by frodo warranty ? something is in a bind...whoever hooked it up, when they knocked out the plug, did they throw it away ? try this..on the bottom, is an allen head slot...put the allen wrench in and turn it counter clock wise with a flash light look in the disposal...see anything ? if nothing is jambing it warranty time,,,get another He said this POS doesn't have an Allen slot. Check for proper power at the outlet and if it's normal, cut your losses and buy an Insinkerator.

warranty ? something is in a bind...whoever hooked it up, when they knocked out the plug, did they throw it away ? try this..on the bottom, is an allen head slot...put the allen wrench in and turn it counter clock wise with a flash light look in the disposal...see anything ? if nothing is jambing it warranty time,,,get another